Setting Dateftime (Clock Set); Changing The Clock Setting - Panasonic Lumix DMC-FZ35 Operating Instructions Manual

Preparation
)
m
Press [MENU/SET].
®
[MENU/SET] button
®
Cursor buttons
• The clock is not set when the camera is shipped.
o
Turn the camera on.
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
[PLAYBACKj Mode.)
iJ
Press
~/~
to select the items (year, month,
... day, hour, minute, display sequence or time
display format), and press £./T to set.
fir
Cancel without setting the clock.
D
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the "Changing the clock setting" procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press ~.
• It can be changed in steps
3
and
4
to set the clock.
• Once a charged battery has been installed for 24 hours, the clock setting is maintained
for 3 months using the built-in clock battery even without the battery.
(ENG) VQT2G40
17