Rotate Disp.]; [Format]; Version Disp.]; Language - Panasonic Lumix DMC-S3 Operating Instructions Manual

Using the [Setup] menu
For details about the setting procedure in the [Setup] menu. (→26)
Item

[Rotate Disp.]

Automatically rotate
• [Rotate Disp.] cannot be used with motion pictures.
portrait still pictures.
• Still pictures taken with the lens surface facing up or
down, or still pictures taken on other cameras may not
rotate.
• Pictures cannot be rotated during Multi Playback.
• Will only be displayed rotated on computer if in Exif-
compatible (→22) environment (OS, software).
Current version is displayed.

[Version Disp.]

Check the version of the
camera firmware.
• This requires a sufficiently charged battery, or an AC

[Format]

adaptor (optional) and DC coupler (optional). When
Use when [Built-In
formatting the built-in memory, remove the cards.
Memory Error] or
(Only inserted card will be formatted if present; built-in
[Memory Card Error]
memory will be formatted if no card is inserted.)
appears, or when
• Always format cards with this camera.
formatting the built-in
• All protected pictures and other picture data will be
memory or card.
deleted.
• Do not turn off power or perform other operations during
When a card/built-in
formatting.
memory is formatted,
• Formatting the built-in memory may take several
the data cannot be
minutes.
restored. Check the
• Consult the dealer or your nearest Service Centre if
content of the card/
format cannot be successfully completed.
built-in memory
carefully before
formatting.
30
VQT3E65
(Continued)
Settings, Notes
/ /[OFF]
For details about the setting procedure in the [Setup] menu. (→26)
Item
Set the language displayed on the screen.

[Language]

Change display
language.
[Demo Mode] [Stabilizer Demo.]
View demonstration of Indicates the extent of jitter detected by the camera
functions. (Estimate)
• When the demo screen is displayed, press [MENU/SET]
to switch the Optical Image Stabilizer between on and
off.
• To cancel → Press [
[Auto Demo]: View introductory Slide Show
[ON]/[OFF]
• To cancel → Press [
• When a card is not inserted, Automatic Demo Mode will
start if there is no operation for about 2 minutes with the
power on, connected to the AC adaptor (optional) and
DC coupler (optional).
• [Auto Demo] cannot be displayed on external devices
such as TVs.
Settings, Notes
Extent of jitter
Extent of jitter after stabilization
/ ].
/ ].
31
VQT3E65