Using The [Setup] Menu; [Clock Set]; [World Time]; [Beep] - Panasonic Lumix DMC-S3 Operating Instructions Manual

Using the [Setup] menu

For details about the setting procedure in the [Setup] menu. (→26)
[Clock Set], [Auto Review] and [Auto Power Off] are important for clock setting and
battery life. Please check these before use.
Item
Set time, date, and display format.

[Clock Set]

(→16)
[Destination]: Set the local time at travel destination.

[World Time]

Set the local time at
[Home]: Set date and time at home area.
travel destination. (→45)
/

[Beep]

Adjust volume of beep
sounds.
[0] / [1] / [2] / [3] / [4] / [5] / [6]

[Volume]

Adjust volume of sound
• Cannot be used to adjust TV speaker volume when
from speakers (7 levels).
connected to TV.

[Focus Icon]

/
Change the focus icon.
[2 MIN.]/[5 MIN.]/[10MIN.]/[OFF]

[Auto Power Off]

The camera turns off
• To restore → Turn on the power again.
automatically after a
• Cannot be used in the following cases:
specified period of
When using AC adaptor (optional) and DC coupler
inactivity.
(optional), when connected to computer/printer, during
motion picture recording/playback, during Slide Shows,
during automatic demo playback
• Specific periods apply in the following situations.
[Intelligent Auto] Mode: [5 MIN.], and when a Slide Show
is paused: [10MIN.]
28
VQT3E65
Settings, Notes
/ : Low/High/Mute
/ / / /
For details about the setting procedure in the [Setup] menu. (→26)
Item
[ON] (Automatically displays for 2 seconds.)/[OFF]

[Auto Review]

Automatically display
• Fixed to [ON] in [Intelligent Auto] Mode.
still pictures immediately
• Auto review occurs immediately after taking still pictures
after taking them.
in [Burst] mode, or [Panorama Assist] in Scene Mode,
regardless of settings.
• Motion pictures cannot be automatically reviewed.
[Reset Rec. settings?]

[Reset]

[Reset setup parameters?]
Reset to the default
settings.
• When [Setup] settings are reset, [Age] setting in [Baby]
Scene Mode is also reset.
• Folder numbers and clock settings will remain
unchanged.
• Camera movement may be audible as the lens function
is reset. This is normal.
[Video Out]

[Output]

Adjust the settings used
[NTSC]/[PAL]
when the camera is
connected to a TV via
[TV Aspect]
the AV cable (optional).
(Playback Mode only.)
/
Settings, Notes
29
VQT3E65