Troubleshooting - Panasonic HDC-SD600P Operating Instructions Manual

High definition video camera
Hide thumbs Also See for HDC-SD600P:
Table of Contents

Advertisement

Others

Troubleshooting

Problem
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery runs down
quickly.
This unit is turned off
automatically.
A clicking sound is
heard when the unit is
shaken.
Remaining battery
indication is not
displayed properly.
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
126
VQT2U72
Check points
≥ Charge the battery again to ensure it is sufficiently
charged. (l 18)
≥ In cold places, the battery using time becomes
shorter.
≥ The battery has a limited life. If the operating time is
still too short even after the battery is fully charged,
the battery has worn out and needs to be replaced.
≥ If the unit turns off when you turn off the power to the
TV using the TV remote control, the VIERA Link is at
work. If you are not using the VIERA Link, set
[VIERA Link] to [OFF]. (l 98)
≥ When this unit is connected to a DVD burner to copy
or play back images (a disc is being accessed), the
unit turns off automatically if the Mini AB USB
Connection Cable is removed.
≥ This is the sound of the lens moving and is not a
defect.
This sound will no longer be heard when the unit is
turned on and change the mode to
≥ The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not
displayed correctly, fully charge the battery,
discharge it and then charge it again.
≥ Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the unit
again. (Conducting the above operation while the
media is being accessed may damage the data on
the media.)
≥ If normal operation is still not restored, detach the
power connected, and contact consumer support.
(l 150)
or
.

Advertisement

Table of Contents
loading

Table of Contents