Toshiba DKT3000 Series User Manual page 101

Table 12 Feature Button Definitions (continued)
Button
Program – Press to enter User Programming mode, which enables you to re-define
Flexible Buttons to perform other functions, including programming One Touch and
Q…‚t…h€
Flexible Buttons, register Call Forward assignments, assign Message Waiting Keys
and assign BGM sources played over the telephone speaker.
Pause/Resume – Press to pause or resume recording a conversation to a voice
QTS@TÃ
mailbox or when playing back the recording.
Record to Voice Mail – Press to record current conversation to voice mailbox.
Srp‚…q
Release and Answer – Press to disconnect or complete the transfer the current outside
Sryrh†rà hqÃ
or extension call and automatically answer the new incoming outside or extension call.
6†
Release – Press to disconnect or complete the transfer of the current outside or
Sryrh†rÃ8hyy
extension call and to place your station in the idle condition.
Speed Dial – Press to Speed Dial a telephone number or feature access codes. SD
T9Â…Ã
buttons can be used as either System Speed Dial numbers or Station Speed Dial
8ˆ†‡‚€v“rqÃ
7ˆ‡‡‚ numbers.
Pause (Long) – Press to insert a 10-second pause when programming Speed Dial
TƒqÃ9vhyÃGtÃ
numbers.
Qhˆ†r
Pause – Press to set either a one-half or two-second pause when programming Speed
TƒqÃ9vhyÃ
Dial numbers. (The pause time is set in system programming).
Qhˆ†r
Start – Press to make an outgoing call using an ISDN trunk.
T‡h…‡
Sub address – Press to enter a sub address on an ISDN trunk outgoing call.
Tˆi
Background Music – Press to turn Background Music on or off over your station
UryÃTr‡Ã
speaker.
Hˆ†vp
Tone – Press to change the outgoing dialing of the outside line in use from dial pulse to
U‚rÃ9vhyÃ
tone signaling.
Tryrp‡
Door Unlock – Press to unlock a door lock mechanism.
Vy‚pxÃ9‚‚…
Strata CTX DKT3000/2000-Series Telephone 10/02
Definitions
Button Labels
Delayed Ringing
87