Aircraft Type Page; Rs-232 Input View Page; Gray Code Input Page - Garmin GTX 327 Installation Manual

3.3.7 AIRCRAFT TYPE Page

SELECTION
AC TYPE
AIRCRAFT TYPE
Used for Automated Airborne Determination (time to STBY, required airspeed, ground speed). Sets the
AIRCRAFT TYPE to ROTOR, to a weight of less than 15,500 pounds, more than or equal to 15,500
pounds, or unknown weight. Defaults to less than or equal to 15,500 pounds.

3.3.8 RS-232 INPUT VIEW Page

Depending on the selected inputs on Channel 1 and Channel 2, this page displays the information
received on the channel. If GPS is selected as an input, ground speed (GSPD), latitude (LAT), longitude
(LON) and track (TRK) can be viewed.
If ICARUS or SHADIN-ALT is selected as an input, pressure altitude (PALT) can be viewed.
If SHADIN-FADC or SHADIN-ADC is selected as an input, true or static air temperature (SAT), outside
or total air temperature (TAT), indicated air speed (IAS), true air speed (TAS), density altitude (DALT),
pressure altitude (PALT), current barometric pressure (BARO) and vertical speed (VSPD) can be viewed.

3.3.9 GRAY CODE INPUT Page

Information on this page may aid in installation
troubleshooting. There are no user inputs or operations on
this page.
GRAY CODE
This field shows the status (1 = ground, 0 = open) of each of the ten gray code altitude inputs. This
information may aid in installation troubleshooting. This page is not used in systems that contain serial
altitude input.
DECODED ALTITUDE
This field displays the gray code altitude input in feet. Verify that it is the correct altitude.
GTX 327 Installation Manual
190-00187-02
DESCRIPTION
UNKNOWN, <15.5K, >=15.5K, or ROTOR.
AIRCRAFT TYPE Page
RS-232 INPUT VIEW Page
GRAY CODE INPUT Page
Page 31
Rev J