King Kutter 999998 Operation And Parts Manual page 9

STEP 7
Using the right side lift arm as a lever, pull to the outside of the lift arm
bracket and inset bolt through lift arm and lift arm bracket. (See Figure I) Install
washer and nut. Place the lift pin in the larger of the (2) holes on the lift arm
brace and loosely attach the lift arm. Finally insert bolt, nut and washer to lower
section of lift arm support strap to lift arm bracket. (See Figure J)
STEP 8
Tighten all nuts and bolts.
Figure A
Figure C
Figure B
Figure D
9