Set Your Country - Brother MFC-J432W Quick Start Manual

IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
(Example for Australia)
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
(Example for Australia)
Set the receive mode to External TAD if you
have an external answering machine. See
Choose a Receive Mode on page 8. (Detailed
information uuBasic User's Guide: Connecting
an external TAD (telephone answering device))
4
4
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by
1
connecting in the power cord.
b
Press a or b to choose your country
(Australia or New Zealand), and press
2
OK.
c
If the LCD shows the correct country, press a or b
to select Yes, and press OK. Then go to step d.
Or press a or b to select No, and press OK. Then
go back to step b and choose the country again.
d
After the LCD shows Accepted for a few
seconds, the machine will restart automatically.
After the restart, the LCD shows Please Wait.

Set your country

(Australia and New
Zealand only)