11 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
LDO19WS TFT-LCD monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
11-1 Disassembly
Cautions:
1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
1. Place monitor face down on cushioned table. Remove 4 screws from the stand.
2. Remove 3 screws from the rear-cover. Lift up the rear-cover.
11 Disassembly and Reassembly
11-1