Safety Systems; Alarm Systems - Electrolux 60 cm Series Service Manual

The intervention of one of the safety systems is signalled in the DIGIT window by an Alarm Code in the form
of a flashing letter.
If an Alarm Code is displayed in the DIGIT window while a programme is in execution, the dishwasher stops
(i.e. the cycle is interrupted) and all functions are disabled, including all the buttons with the exception of the
"ON/OFF" button.
SAFETY SYSTEM
Time-out WATER FILL
Time-out SUPPLEMENTARY FILL
Time-out PRESSURE SWITCH "EMPTY" (waiting for correct temperature)
Time-out TEMPERATURE SENSOR
Time-out WATER HEATING
Time-out PRESSURE SWITCH "EMPTY" (end of drain)
RESET / CANCEL ALARM
To reset or cancel an alarm condition, press the "ON/OFF" button to switch off the appliance.
Press the "ON/OFF" button again; the appliance returns to the Programme Selection phase, and the washing
cycle can be re-selected.
If the fault persists, the appliance returns to the
ALARMS
(ITRONIC "HL")
ALARM .
condition
- 40 -
ALARM CODE
A
C
F
L
H
P