Figure 18. Installing a new hard disk drive into the bracket
7. Connect one end of the signal cable that comes with the new hard disk drive to the rear of the new
hard disk drive.
Note: The signal cable will be different depending on whether you are installing a SATA hard disk
drive or a SAS hard disk drive.
Figure 19. Connecting the signal cable to a SATA hard disk drive
Figure 20. Connecting the signal cable to a SAS hard disk drive
8. Slide the new hard disk drive with the bracket and the signal cable into the hard disk drive bay until
it snaps into position.
.
Chapter 9
Replacing FRUs
85