Note - Panasonic WV-SP300 Series Operating Instructions Manual

[Max bit rate]
Select the bit rate for images to be recorded from the fol-
lowing.
64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/
768kbps/ 1024kbps/ 1536kbps/ 2048kbps/
3072kbps/ 4096kbps
Default: 1536kbps
[Image quality]
Select the quality for H.264 images to be recorded from
the following.
Fine(Image quality priority)/ Normal/
Low(Motion priority)
Default: Normal

Note:

• When "Constant bit rate" is selected for "Recording
priority", this setting is available.
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 1 second) to
refresh the H.264 images to be recorded from the follow-
ing.
0.2s/ 0.33s/ 0.5s/ 1s
Default: 1s
■ SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD mem-
ory card will be displayed.
Depending on the status of the SD memory card, the
size indications will differ as follows.
Indication Description
--------KB/--------KB N o SD memory card is
inserted.Failed to obtain avail-
able capacity due to error, etc.
********KB/********KB T he SD card memory is unfor-
matted, or locked, etc.
Note:
• When "Off" is selected for "Overwrite" and the avail-
able size of the SD memory card has reached
"0 KB", images will not be saved on the SD memory
card. When the notification function is on, a notifica-
tion mail will be sent to the registered addresses
when the SD memory card becomes full. (☞ Pages
67 and 68)
[Format]
To format the SD memory card, click the [Execute] but-
ton.
Important:
• Before formatting the SD memory card, it is neces-
sary to select "Use" for "SD memory card" on the
[SD memory card] tab of the "Basic" page (☞ page
28) and "Off" for "FTP periodic image transmission"
on the [FTP img. trans.] tab of the "Network" page
(☞ page 83).
• Use the SD memory card after formatting it using
the [SD memory card] tab.
If using the SD memory card that has not been for-
matted on the [SD memory card] tab, the following
functions may not work correctly.
• Save/obtain images that failed to transmit to the
FTP server using the FTP periodic image trans-
mission function
• Save/obtain alarm images
• Save/obtain images saved manually
• Save/obtain the alarm logs, the manual logs, the
FTP error logs and the system logs
• Save/obtain images recorded using the SD
memory recording function of Panasonic's net-
work disk recorder.
• Play/download images on the SD memory card
• When an SD memory card is formatted while
another user is in operation, the operation will be
canceled.
• It is impossible to access the SD memory card dur-
ing the process of formatting.
• All data saved on the SD memory card will be
deleted when the SD memory card is formatted.
• Do not turn off the power of the camera during the
process of formatting.
• When the setting of "Save trigger" has been
changed, it is recommended to format the SD mem-
ory card.
31