Panasonic WV-SP300 Series Operating Instructions Manual page 30

• When "FTP error" is selected for "Save trigger", the
file name entered for "File name" on the [FTP img.
trans.] tab of the "Network" page will be used for
the file name of the image saved on the SD memory
card.
[Image saving interval/Number of images to be
saved - Image saving interval]
When "Alarm input" or "Manual" is selected for "Save
trigger", select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
Default: 1fps
[Image saving interval/Number of images to be
saved - Number of images to be saved]
Select a number of alarm images to be saved on the SD
memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
Default: 100pics
Note:
• When "H.264" is selected for "Recording format",
Pre alarm and Post alarm can be set on "H.264
recording" of [Alarm] tab.
• "Number of images to be saved" can be configured
only when "Alarm input" is selected for "Save trig-
ger".
[Image capture size]
When "Manual" is selected for "Save trigger" and "JPEG"
is selected for "Recording format", select the image cap-
ture size of the images to be saved on the SD memory
card from the following.
When "4:3" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960*
QVGA/ VGA/ 800x600*
When "16:9" is selected for "Aspect ratio"
320x180/ 640x360/ 1280x720*
320x180/ 640x360*
Default: VGA
Note:
• When "FTP error" is selected for "Save trigger", images
will be saved with the image capture size selected on
the [FTP img. trans.] tab of the "Network" page.
• When "H.264" is selected for "Recording format",
select the image capture size for "H.264 recording" -
"Image capture size" on the [SD memory card] tab.
30
1
2
1
2
• When "Alarm input" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm" page.
■ H.264 recording
This setting is available only when "H.264" is selected for
"Recording format" of the SD memory card.
When the second [Set] button on the setup page is
clicked, the settings for "H.264 recording" will be dis-
played on the bottom of the tab.
[Image capture size]
Select the image capture size from the following.
When "4:3" is selected for "Aspect ratio"
1
QVGA/ VGA*
2
QVGA/ VGA*
When "16:9" is selected for "Aspect ratio"
1
320x180/ 640x360*
2
320x180/ 640x360*
Default: VGA
[Recording priority]
Constant bit rate" or "Frame rate" for the H.264
Select "
recording mode.
Constant bit rate: H.264 images will be recorded with
the bit rate selected for "Max bit rate".
Frame rate: H.264 images will be recorded with the
frame rate selected for "Frame rate*".
Default: Constant bit rate
[Frame rate*]
Select the frame rate for images to be recorded from the
following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps (PAL models)*/
15fps*/ 20fps*/ 30fps*
Default: 30fps*
Note:
• When "Frame rate" is selected for "Recording priority",
this setting is available.
• "Frame rate*" is synchronized with "Max bit rate".
For this reason, the frame rate may be lower than the
specified value when any value marked with an asterisk
(*) is selected.
*1
SP306 SP305 SF336
*2
SP302 SF332
SF335