Bluetooth Pairing - JBL 950-0224-001 User Manual

6 jbl on tour Xtb user Guide

Bluetooth pairinG

Before you can use your JBL On Tour
1. Make sure your JBL On Tour XTB system is turned on. The JBL On Tour XTB unit automatically goes into Pairing/Discoverable mode,
represented by a constant blue indicator light.
2. Put your Bluetooth-enabled device in Pairing mode so the devices can "see" each other. (Refer to the Bluetooth-enabled device's
user's guide for directions and details about putting it into Pairing mode.) The JBL On Tour XTB unit will be represented as
"OnTourXTB" on your Bluetooth-enabled device. The JBL On Tour XTB password is 8888.
3. The JBL On Tour XTB system is successfully paired and ready to use when the blue indicator light flashes.
Note: Bluetooth pairing between two devices does not have to be repeated after a successful initial pairing, unless the JBL On Tour XTB
system has been removed from the Bluetooth-enabled device's Bluetooth device list.
1.
listeninG to music from a
Bluetooth-enabled device
1. Make sure the JBL On Tour XTB system is paired (see Bluetooth Pairing section).
2. Go to the Bluetooth-enabled device's music player and play music. Refer to the Bluetooth-enabled device's user's guide for
directions and details about using its music player and transmitting music via Bluetooth technology.
3. Use either the Bluetooth-enabled device or the JBL On Tour XTB remote control to navigate the music player.
XTB system with a Bluetooth-enabled product, you must pair it with that product. To pair:
™