General Setup - JBL 950-0224-001 User Manual

4 jbl on tour Xtb user Guide
unpackinG
Carefully unpack your speaker system and identify all its components:
JBL On Tour XTB unit
™

General setup

Unpack the JBL On Tour XTB system and its power supply.
1. Plug the adapter into the "12V DC-in" port on the back of the unit and then into a wall outlet.
2. Turn on the power switch. The green indicator light will turn on.
3. Remove the remote control battery protector before operating the remote control.
1.
volume control (on base unit)
Volume increase " "
Volume decrease " "
Answer/end phone call (MFB) " "
Power supply Auxiliary audio cable
2.
Remote control
Power switch
Carry case