Installing The Dishwasher; Step 1 Checking The Parts And Tools - Samsung DMT800 series Installation Manual

Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you're not at risk of injury when washing
dishes,
STEP 1 CHECKING THE PARTS AND TOOLS
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts required
Provided
2 InstallationBrackets
Not provided
2Flat Head s crews
(E0rthe installation
bracket)
2 screws
(for the side walls)
2 screws
(for the kiCk plate)
Power cable
Water Supply line
Twist on wire
Strain relief
connector
90i ElboW(3/81') Tubefittings
EleCtriCal tape &
Standard duct tape
® TeflonFtape O r.sealing
compound
Hose clamp Air gap Rubberconnector
For the water supply line - Flexible stainless steel braided supply line or Minimum 3/8" O.D.
copper tubing with compression fitting. (Plastic tubing is not recommended)
A 90 ° elbow with 3/8" N.P.T. external pipe threads on one end, and sized to fit your water
supply line (copper tubing/compression fitting, or braided hose) on the other
6 instaling the dshwasher