Samsung HT-E4500K User Manual page 33

2 · Select Add Network on the bottom of the
screen, and then press E . Select Next, and
then press the E button again.
The Add Network Settings screen appears.
3 · Use the keypad on your remote to enter the
Wireless Router Name. Select Next, and
then press the E button when done. The
Security Type screen appears.
| NOTE |
\ Enter numbers in the Wireless Router Name by pressing
the number buttons on your remote.
\ Enter letters by selecting a letter using the ▲▼◀▶
buttons, and then press E button.
\ To display capital letters (or redisplay small letters if
capital letters are displayed), select A/a, and then press
the E button.
\ To display symbols and punctuation, select , and then
press the E button. To redisplay letters, select A/a, and
then press the E button.
4 · Select the Security Code protocol you are
using on your router, and then press the E
button. Select Next, and then press the E
button again. The Security screen appears.
5 · On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with the ▲▼◀▶
buttons, and then press E . For additional
instructions, see the Notes after Step 3.
6 · When done, select Next at the right of the
screen, and then press E .
7 · The Network Status screen appears. The
product verifies the network connection and
then connects to the network. When it is
done, highlight OK, and then press E .
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
1 · Select WPS(PBC) in the Network Settings
menu, and then press the E button. Select
Next, and then press the E button again.
2 · Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
3 · The Network Status screen appears. The
product verifies the network connection and
then connects to the network. When done,
highlight OK, and then press E .
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
1 · In the Home screen, select Settings, and
then press the E button.
2 · Select Network, and then press the E
button.
3 · Select AllShare Settngs, and then press the
E button.
4 · Select a device, and then press the E
button. The AllShare Settings pop-up
appears.
5 · Select Allow, Deny, or Delete from List, and
then press the E button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 36~37.
33
|
English