Main - Foxconn Q45M Series User Manual

Main

This menu is used to set up the standard BIOS features, such as the date, time and so on. Use
the arrow up/down keys to select an item, then use the <+> or <-> keys to change the setting.
Main
BIOS Information
BIOS Vendor
Core Version
Build Date
System Date
System Time
Total Memory
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Port6
Model Name
MAC Address
CPU Brand Name
Project Version
Access Level
bIoS Information
► BIOS Vendor
It displays the name of BIOS vendor.
► Core Version
It displays the AMI Aptio version.
► Build Date
This item shows the BIOS building date.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► System Time
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► Total Memory
This item displays the total memory size. The size is depending on how many memory mod-
ules are installed in your system before powering on.
► SATA Port1/2/3/4/5/6
While entering setup, BIOS automatically detects the presence of SATA devices. This item
displays the drive information of SATA devices.
► Model Name
This item shows the model name of this product.
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Advanced Chipset Boot Security Health Save&Exit
American Megatrends
4.6.3.2
12/03/2008 10:10:34
[Wed 12/03/2008]
[09:44:21]
512 MB (DDR2 667)
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Q45M
88-88-88-88-87-88
Intel(R) Core(TM) 2 Quad
CPU Q9300 @2.50GHz
882F1P01
Administrator
Version 1.24.1115. Copyright (C) 2008 American Megatrends, Inc.
Set the Date. Use Tab to switch
between Data elements.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
22