Brother HL-L8350CDW User Manual page 105

General Information
Network for HL-L8350CDW and HL-L8350CDWT (continued)
Submenu 1 Submenu 2
WLAN TCP/IP
WLAN Assistant
Setup Wizard
WPS/AOSS
WPS w/PIN Code
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Auto* / Static / RARP /
Boot Method
BOOTP / DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
0 / 1 / 2 / 3* / ... / 32767
IP Boot Tries
On* / Off
APIPA
On / Off*
IPv6
- -
- -
- -
- -
Descriptions
Chooses the IP method
that best suits your
needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway
address.
1
Specifies the number of
attempts the machine
will try to obtain an IP
address when the Boot
Method is set to any
setting except Static.
Automatically allocates
the IP address from the
link-local address
1
range.
Enables or Disables the
IPv6 protocol.
You can configure your
wireless network settings
using the Brother
CD-ROM.
Configures the wireless
network settings using
the setup wizard.
Configures the wireless
network settings using
WPS or AOSS™
method.
Configures the wireless
network settings using
WPS with a PIN code.
3
98