Table of Contents
Advertisement
Section 5
Device Configuration
After new devices are found and addressed in the ATC200-Lite program, each device is ready
to be configured. New devices, that have never been configured before, will display the status
as 'Not Configured' in the 'Device Information' list.
1. To begin device configuration, click on the device to be configured (Figure 5-1).
2. Click on 'Edit Selected' to open the 'Device Configuration' screen (Figures 5-1 and 5-2).
1. Click on device to be configured.
2. Click 'Edit Selected'.
Figure 5-1. Selecting Device to be Configured.
Bulletin 639510
May 2005
5-1
Advertisement
Table of Contents
