Table of Contents
Advertisement
Shooting Issues
Problem
Cannot switch to shooting
mode.
No image captured when
the shutter-release button is
pressed.
Camera cannot focus.
Images are blurred.
F10
Cause/Solution
• Disconnect the HDMI cable or USB cable.
• The camera cannot be switched to shooting mode
while connected to a power outlet via the
Charging AC Adapter.
• When the camera is in playback mode, press the
A button, the shutter-release button, or the
b (e movie-record) button.
• When menus are displayed, press the d button.
• The battery is exhausted.
• When the flash lamp is flashing, the flash is
charging.
• The subject is too close. Try shooting using scene
auto selector mode, Close-up scene mode, or
macro mode.
• The subject is hard to focus on.
• Set AF assist in the setup menu to Auto.
• Turn the camera off and then on again.
• Use the flash.
• Increase the ISO sensitivity value.
• Enable vibration reduction or motion detection.
• Use D (Best Shot Selector).
• Use a tripod to stabilize the camera when shooting
(using the self-timer at the same time is more
effective).
A
83, 88,
E22,
E25
12
1, 28
4
20
49
32, 36, 53
66
79, E79
20
49
58
78
37, 58,
E39
51
Advertisement
Table of Contents
