About Memory; Recalling Data; Clearing Data - SENDO ECONOMY Instruction Manual

About Memory

The device automatically stores up to thirty blood pressure and pulse measure-
ments in memory. Data stored in memory are assigned a data number in the order
of the newest to the oldest. The oldest data displays as "n01". The M symbol in the
upper left corner of the display indicates that you are viewing previous data stored
in memory.

Recalling Data

When nothing is displayed, press and hold the
1
START button to display the data number.
The data number of the most recent
measurement and the data are displayed.
2 The data are automatically displayed in turn.
The display will shut o automatically after all
3
data is displayed.
Note: If you press the START button while
recalling data, the device
starts measurement.

Clearing Data

Remove the batteries to clear all data.
Re-install them again.
If there is no data stored in memory, you will see two 0s displayed vertically
followed by a blinking "A00".
8
1
2
3