About Memory; Recalling Data; Clearing Data - SENDO Advance Instruction Manual

About Memory

The device automatically stores up to thirty blood pressure and pulse measure-
ments in memory. Data stored in memory are assigned a data number in the order
of the newest to the oldest. The oldest data displays as "n01". The M symbol in the
upper left corner of the display indicates that you are viewing previous data stored
in memory.

Recalling Data

1
When nothing is displayed, press and hold the
START button to display the data number.
The data number of the most recent
measurement and the data are displayed.
The data are automatically displayed in turn.
2
3
The display will shut o automatically after all
data is displayed.
Note: If you press the START button while
recalling data, the device
starts measurement.

Clearing Data

Remove the batteries to clear all data.
Re-install them again.
If there is no data stored in memory, you will see two 0s displayed vertically
followed by a blinking "A00".
1
2
3
9