Checking And Lubricating The Brake And Shift Pedals; Checking The Wheel Bearings; Lubricating The Knuckle Shafts; Lubricating The Steering Shaft - Yamaha Grizzly 80 YFM80GW Owner's Manual

EBU24930
Checking and lubricating the brake and
shift pedals
The operation of the brake and shift pedals should
be checked before each ride, and the pedal pivots
should be lubricated if necessary.
Recommended lubricant:
Lithium-soap-based grease (all-purpose
grease)
EBU24961

Checking the wheel bearings

The front and rear wheel bearings must be
checked at the intervals specified in the periodic
maintenance and lubrication chart. If there is play
in a wheel hub or if a wheel does not turn smoothly,
have a Yamaha dealer check the wheel bearings.
EBU25070

Lubricating the knuckle shafts

The knuckle shafts must be lubricated at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
Lubricate the knuckle shafts using a grease gun.
Recommended lubricant:
Lithium-soap-based grease
1
1. Grease nipple
EBU25090

Lubricating the steering shaft

The steering shaft must be lubricated at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
8-31
1
2
3
4
5
6
7
8
9
10
11