Player Status Indicators - Sonos Connect Product Manual

16

Player Status Indicators

Important Note: Do not place any items on top of your Sonos player. This may impede the
air flow and cause it to overheat.
Indicator Lights
Solid white Powered up and associated with a
Sonos system
Flashing white Powering up
Flashing green Powered up, not yet associated with
a Sonos system
Solid green Volume set to zero or muted
Surround audio is off or 
Slowly flashing green
SUB audio is off
Solid orange During wireless setup, this occurs
while the Sonos open access point is
temporarily active. 
If you are not setting up your Sonos
system, this may indicate warning
mode.
Player State Sonos Product
BRIDGE, BOOST, If desired, when the product is in normal operation,
CONNECT, SUB, you can turn the white status indicator light on or off
CONNECT:AMP, DOCK, by selecting White Status Light from the Room
PLAY:1, PLAY:3, PLAY:5, Settings menu.
PLAYBAR (The SUB indicator will reflect the same setting as
the player it is paired with.)
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST, For a SUB, this may indicate the SUB is not yet paired
CONNECT, SUB, with a player.
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
CONNECT,
CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
PLAY:1, PLAY:3, SUB Applicable for player configured as a PLAYBAR
surround speaker, or for a SUB paired with a PLAYBAR
CONNECT, SUB, If the orange light is on AND the player's volume
CONNECT:AMP, PLAY:1, level automatically reduces, this indicates the player
PLAY:3, PLAY:5, is in warning mode.
PLAYBAR
Additional Information
•
Press the Pause button to stop the audio
•
Check the vent slot for adequate cooling
•
Check the room temperature to make sure it's
less than 104°F/ 40° C
•
If the player is in direct sunlight, provide
shade
•
Allow the player to cool for several minutes
and then press Play to restart the audio
•
If the problem does not resolve, please
contact Customer Support
Product Guide