Commissioning - Bosch MM588 Operating Instructions Manual

Getting to know your handset

Commissioning

When you receive your handset, it is registered in the system and ready for
operation. All you need to do is connect the supplied charger.
Placement of the charger
Place the charger on a solid, even surface, e.g. a table. Choose a location
that is protected from direct sunlight and dampness. Please also observe
the information on P. 66.
Insert the mains plug into a socket. The charger is ready for operation.
Charging the handset
Simply place the handset into the
charger. You will hear an
acknowledgement tone. The display
and keypad lights will switch on
briefly. The battery symbol in the
symbol line will start to move. The
battery is being charged.
When the batteries are being
charged, they will become slightly
warm. This is perfectly normal.
Removing the battery
Place the handset on a table with the
display facing down. Press in the
clip. Pull up the clip on the battery.
Before using the handset for the first time, the batteries should be charged
for at least 8 hours.
New battery cells will generally only reach their full capacity after several
days of standard operation.
8
Charging
indicator light
for replacement
battery
Integral 3
Press in the
clip.
i