Driver Installation And Setup - ASROCK 970 Extreme3 User Manual

2.5.2 Driver Installation and Setup

Step 1. Power on your computer and boot into OS.
Step 2. Remove the AMD
tem.
The Catalyst Uninstaller is an optional download. We recommend using this
utility to uninstall any previously installed Catalyst drivers prior to installation.
Please check AMD website for AMD
Step 3. Install the required drivers to your system.
For Windows
TM
A. AMD
installed (If you have Windows
in your system, there is no need to download it again):
http://www.microsoft.com/windowsxp/sp2/default.mspx
B. You must have Microsoft .NET Framework installed prior to
downloading and installing the CATALYST Control Center. Please
check Microsoft website for details.
For Windows
Install the CATALYST Control Center. Please check AMD website for de-
tails.
Step 4. Restart your computer.
Step 5. Install the VGA card drivers to your system, and restart your computer.
Then you will ind "ATI Catalyst Control Center" on your Windows
Step 6. Double-click "ATI Catalyst Control Center". Click "View", select "CrossFi-
TM
reX ", and then check the item "Enable CrossFireX
and click "Apply" (if you install two Radeon graphics cards).
TM
driver if you have any VGA driver installed in your sys-
®
XP OS:
recommends Windows
® TM
7 / Vista OS:
ATI Catalyst Control Center
TM
driver updates.
®
XP Service Pack 2 or higher to be
®
XP Service Pack 2 or higher installed
22
®
taskbar.
TM
". Select "2 GPUs"