Using Smartdiagnosis - LG DLEX3470 Series Owner's Manual

USING SMARTDIAGNOSIS

NOTE
- Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax machine, and so has no
meaning except to the call center.
- SMARTDIAGNOSIS™ cannot be activated if the dryer does not power up. If this happens, then troubleshooting must be done without
SMARTDIAGNOSIS™.
TM
- SMARTDIAGNOSIS is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting through
service calls. The effectiveness of this feature depends upon various factors, including, but not limited to, the reception of the
cellular phone being used for transmission, any external noise that may be present during the transmission, and the acoustics of the
room where the machine is located. Accordingly, LG does not guarantee that SMARTDIAGNOSIS
any given issue.
and do the following steps when requested:
Do not press any other buttons.
3. Press and hold TEMP.CONTROL button for three seconds, while holding the phone mouthpiece to the icon or POWER button.
time.
to assist you using the information transmitted for analysis at the call center.
TM
SMARTDIAGNOSIS™.
TM
USING SMARTDIAGNOSIS
TM
would accurately troubleshoot
39