Sony Xperia T User Manual page 14

To charge the phone
1 Plug the phone charger into a power outlet.
2 Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3 Plug the other end of the cable into the micro USB port on your phone, with
the USB symbol facing up. The battery status LED lights up when charging
starts. If the battery is completely discharged, it may take a few minutes before
the LED lights up after you connect the phone charger cable to a power
source.
4 When the battery status LED is green, the phone is fully charged. Disconnect
the USB cable from your phone by pulling it straight outwards. Make sure not
to bend the connector when removing the cable from the phone.
Use the charger and USB cable provided with the phone to ensure faster charging.
Battery LED status
Green The battery is fully charged
Flashing red The battery level is low
This is an Internet version of this publication. © Print only for private use.
14