Sony STR-DE895 Service Manual page 2

STR-DE895/DE995
Frequency response
PHONO RIAA equalization curve
±0.5 dB
MULTI CH IN (1, 2), 10 Hz – 70 kHz
CD/SACD, TV/SAT, +0.5/–2 dB (with sound
MD/TAPE, DVD, field and equalizer
VIDEO 1, 2, 3 bypassed)
Inputs (Analog)
PHONO Sensitivity: 8 mV
Impedance: 50 kilohms
S/N 5) : 86 dB (A, 8 mV
MULTI CH IN (1, 2), Sensitivity: 500 mV
CD/SACD, TV/SAT, Impedance: 50 kilohms
5)
MD/TAPE, DVD, S/N : 96 dB
VIDEO 1, 2, 3 (A, 500 mV
5) INPUT SHORT (with sound field and equalizer
bypassed).
6) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
TV/SAT, CD/SACD, Sensitivity: –
MD/TAPE, VIDEO 3 Impedance: –
(Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT), Voltage: 500 mV
VIDEO 1, 2 Impedance: 10 kilohms
(AUDIO OUT)
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Outputs (Digital)
MD/TAPE (Optical) Sensitivity: –
EQUALIZER
Gain levels: ±10 dB, 0.5 dB step
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate Frequency 10.7 MHz
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale: 530 – 1710 kHz
With 9-kHz tuning scale: 531 – 1710 kHz
Models of area code E2, E3
With 10-kHz tuning scale: 530 – 1610 kHz
With 9-kHz tuning scale: 531 – 1602 kHz
Models of area code MX
With 10-kHz tuning scale: 530 – 1610 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
2
6) )
6)
)
7)
7)
7)
7)
7) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1 . All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y: 1 Vp-p, 75 ohms
P /B-Y: 0.7 Vp-p, 75 ohms
B
P /R-Y: 0.7 Vp-p, 75 ohms
R
Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y: 1 Vp-p, 75 ohms
P /B-Y: 0.7 Vp-p, 75 ohms
B
P /R-Y: 0.7 Vp-p, 75 ohms
R
General
Power requirements
Area code Power requirements
US, CND, MX 120 V AC, 60 Hz
E2, E3 120/220/240 V AC, 50/60 Hz
Power consumption
Area code Power consumption
US STR-DE995: 300 W
STR-DE895: 265 W
CND 410 VA
E2, E3, MX 265 W
Power consumption (during standby mode)
0.3 W (when "POWER SAVE" in the
CUSTOMIZE menu is set to "ON")
AC outlets 2 switched, 120 W/1 A MAX
(Models of area code US, CND)
1 switched, 100 W MAX
(Models of other area code)
Dimensions 430 × 159 × 324 mm
(16 × 6
7/8
including projecting parts
and controls
Mass (Approx.) 10.6 kg (23 lb 6 oz) (STR-DE995)
9.7 kg (21 lb 7 oz) (STR-DE895)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander (1)
• RM-LG112 (STR-DE995 models of area code US only)
• RM-PG412 (Models of other area code)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
• Abbreviation
CND : Canadian model
E2 : AC 120 V area in E model
E3 : AC 240 V area in E model
MX : Mexican model
× 12 in.)
2/8 6/8