Sony DCR-PC105 Service Manual page 252

Changing the menu settings
Icon/item
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
1)
* DCR-PC105E only
2)
* DCR-PC103E only
3)
* DCR-PC104E/PC105E only
Note
If you press DISPLAY/BATT INFO with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
244
Mode Meaning
—— To set the clock to the local time. Press r/R to set a
time difference. The clock changes by the time
difference you set here. If you set the time difference
to 0, the clock returns to the originally set time.
z MELODY To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder
NORMAL To output the beep instead of the melody
OFF To cancel melody, the beep sound and shutter sound
z ON To activate the Remote Commander supplied with
your camcorder
OFF To deactivate the Remote Commander to avoid
erroneous remote control operation caused by other
VCR's remote control
z LCD To show the display on the LCD screen and
viewfinder
V-OUT/LCD To show the display on the TV screen, LCD screen
and viewfinder
POWER
switch
1)
*
* 2)
3)
*
1)
*
* 2)
* 3)
* 1)
2)
*
3)
*
1)
*