Gigaware 26-1031 User Manual page 6

3. Press and hold SELECT and L3 (left analog stick) on
the controller simultaneously for at least 3 seconds.
When the RX indicator stays lit, release SELECT and
L3.
4. Press the PS button to assign a controller number.
The corresponding port indicator lights.
n
Notes:
• Repeat "Connect to PS3" or "Manual Search" if
the connection fails again.
• If you purchase a new receiver for the controller,
but have previously been using it with the supplied
receiver, you will have to follow connection steps
again.
Reassigning a controller number
1. Press and hold the PS button for one second.
The functional
screen displays.
Select "Controller
Settings" , then
"Reassign the
controller. " Press X
to confirm.
2. Use the D-pad to
select the number
that matches the
controller's port.
3. Press X again to confirm. The corresponding port
indicator lights up.
6