Gigaware 26-1031 User Manual page 5

Connect to PS3
1. Turn on your console and plug the receiver into the
first port on the console. The RX indicator on the
receiver flashes.
2. Slide POWER
ON/OFF to
ON to turn on
the controller.
The controller's
POWER
indicator lights
and the 4 port indicators flash.
3. The controller connects with the receiver
automatically after about 3 seconds. If successful,
the RX indicator on the receiver lights.
4. Press the PS button to assign a controller number.
The corresponding port indicator lights.
Manual Search
If you are unable to automatically connect,
try manual adjustment.
1. Repeat steps 1 and 2 under "Connect
to PS3. "
2. Press CONNECT on the receiver. The
RX indicator flashes.
5