Use Your Headset; Connect The Headset To A Bluetooth Device; Manage Your Calls And Music - Philips SHB5500 User Manual

4 Use your
headset
Connect the headset to a
Bluetooth device
1
Turn on your mobile phone/Bluetooth
device.
2
Press and hold
on.
» The blue LED flashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
•
If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
•
If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.

Manage your calls and music

Task Operation
Turn the Press and hold
headset on.
than 1 second
to turn the headset
Sound
or LED
Indicator
1 short
for more beep
Turn the Press and hold
headset off.
than 4 seconds
Play or pause
Press
music.
Pick up or
Press
terminate a
call.
Reject a call. Press and hold
Redial the last
Press
number.
twice
Switch caller in
Press
a call.
twice
Adjust volume. Press +/-
Skip forward. Press and hold
+
Skip backward. Press and
hold -
Other headset indicator status
Headset status
The headset is connected
to a Bluetooth device,
while the headset in
standby mode or while
you are listening to music.
The headset is ready for
pairing.
The headset is on but not
connected to a Bluetooth
device.
There is an incoming call.
The battery level is low.
The battery is fully charged.
• 1 long
for more beep
• 1 long
white
flash
1 short
beep
1 short
beep
1 short
beep
1 short
beep
1 long beep
1 short
beep
1 short
beep
1 short
beep
Indicator
The blue LED
flashes for every
6 seconds.
The LED flashes
blue and white
alternately.
The blue LED
flashes quickly.
The blue LED
flashes twice per
second.
The white LED
flashes.
The white LED
is off.
EN
5