Get Started; Charge Your Headset; Pair The Headset With Your Mobile Phone - Philips SHB5500 User Manual

3 Get started

Charge your headset

Note
•
Before you use your headset for the first time, charge
the battery for 5 hours for optimum battery capacity
and lifetime.
•
Use only the original USB charging cable to avoid any
damage.
•
Finish your call before charging the headset, as
connecting the headset for charging will power the
headset off.
•
You can operate the headset normally during charging.
Connect the supplied USB charging cable to:
• the micro USB charging slot on the
headset and;
• the charger/USB port of a computer.
» LED turns white during charging and
turns off when the headset is fully
charged.
Tip
•
Normally, a full charge takes 3 hours.
Pair the headset with your
mobile phone
Before you use the headset with your mobile
phone for the first time, pair it with a mobile
phone. A successful pairing establishes a unique
encrypted link between the headset and mobile
phone. The headset stores the last 8 devices
in the memory. If you try to pair more than 8
devices, the earliest paired device is replaced by
the new one.
1
Make sure that the mobile phone is turned
on and its Bluetooth feature is activated.
EN
4
2
Make sure that the headset is fully charged
and turned off.
3
Press and hold
white LED flashes alternately.
» The headset remains in pairing mode
for 5 minutes.
4
Pair the headset with the mobile phone.
For detailed information, refer to the user
manual of your mobile phone.
The following example shows you how to pair
the headset with your mobile phone.
1
Activate the Bluetooth feature of your
mobile phone, select Philips SHB5500.
2
Enter the headset password "0000" (4
zeros) if prompted. For those mobile
phones featuring Bluetooth 2.1+EDR or
higher, no need to enter a password.
10:35
Settings Connectivity Settings
Bluetooth Devices Found
Add
Philips SHB5500
Bluetooth
device
Select Select
Back
until the blue and
10:36 10:37
Settings Connectivity
Enter Password
****
0000
Select
Back Back