Cisco BR1400 Deployment Manual page 37

7. Is there a source of electrical power (assuming power is needed) for powering tools such
as drills, test equipment or for the bridge if required?
8. Always beware of electrical wires or other objects that could come in contact with the
bridge, employ or seek out a professional installer when in doubt.
6.3 Mounting the Bridges
The BR-1400 outdoor unit can be mounted directly to a user supplied mast pipe or directly to
a side of a radio tower. For larger mast pipes 2.5 to 4.5 inches in diameter the mast pipe
attaches to the outside of the bracket. For smaller mast pipes 1.5 to 2.5 inches in diameter the
mast pipe attaches to the inside of the bracket.
The ODU can be mounted on a large or small Mast Pipe using the supplied
Figure 32.
bracket
.
Optional Roof/Wall mount Kits is available.
Figure 33.
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Page 37 of 53