Cannot Connect To The Video - Speco D1BD User Manual

D1BD User's Guide

4.2. Cannot connect to the Video

Check the status of the network connection through PING test.
Try the following on your PC:
-
Start > Run > Cmd > Ping IP address (Ex : Ping 172.16.42.51)
- If "Reply from ~" message is returned (
Try connection to the video again. If the problem persists, or refer to other troubleshooting notes.
- If "Request timed out" message is returned (
setting is not in normal state. Check the network cable and settings.
in the figure
1
below), the network connection is in normal state.
in the figure below), the network connection or network
2
Rev. 1.0 (Dec 6, 2013) 19