Speco D1BD User Manual page 13

D1BD User's Guide
2. Install Speco-NVR
Speco-NVR is a multi-channel VMS program for to IP camera or Video server. Install Speco-NVR on a
remote PC to connect to these products. It is needed to assign connection before connection. Insert the CD
provided with the product into the PC and install Speco-NVR.
Follow the sequence below for setting the IP parameter
i) Run ONSIP installer
ii) Click ① in ONSIP installer window.> Double click on
parameters in ⑥
iii) Click on to apply the settings.
⑨
iv) You can connect to admin page by clicking on
O N S I P i n s t a l l e r
Figure 3-2. Speco-NVR
② > Fill in ④ > make a selection in ⑤ > Fill the
.
⑩
A d m i n P a g e B u t t o n
Rev. 1.0 (Dec 6, 2013) 13