Mobile Networks - Colorfly E708 Q2 User Manual

1. Go to Settings > WIRELESS & NETWORKS and tap a connected Wi-Fi network to open it.
2. Tap Forget in the displayed dialog box.
The connection information is deleted and you need to set information to connect to it next
time.
Set a Wi-Fi network
1. Go to Settings > WIRELESS & NETWORKS, tap
2. Select Network notification.
The system automatically notifies you of open Wi-Fi networks nearby.
3. Tap Keep Wi-Fi on during sleep.
In the dialog box that appears, tap Always, Only when plugged in, or Never (increases data
usage) to set whether to keep Wi-Fi connected when the tablet is in sleep mode and when to
keep Wi-Fi connected. If you tap Always, the Wi-Fi network is always connected even when
the tablet is in sleep mode.

Mobile networks

1. Use a 3G USB Dongle to connect to the tablet through the included OTG cable when the tablet
is on. The tablet automatically identifies the 3G mobile device.
2. Use the tablet after the 3G signaling icon is displayed on the status bar.
Tips: There are various 3G network card brands. To ensure better network access experience, you
are advised to test a 3G card before buying it.
Enable the 3G network
The 3G network is enabled by default. To disable the 3G network, perform the following steps:
1. Go to Settings > WIRELESS & NETWORKS and tap More.
2. Tap Mobile networks and deselect Data enabled. The 3G network is disabled.
, and tap Advanced.
User Manual
9