Settings; Wireless & Networks - Colorfly E708 Q2 User Manual

4 Settings

Wireless & Networks
Wi-Fi
Turn on the Wi-Fi network
1. Go to Settings > WIRELESS & NETWORKS and tap ON/OFF on the right to disable or
enable the Wi-Fi service.
2. Tap Scan when the Wi-Fi service is enabled to view the detected Wi-Fi networks.
3. Tap the required Wi-Fi network to connect to it. If a password has been set for the Wi-Fi
network, enter the password in the displayed dialog box and tap Connect.
After you successfully connect to the Wi-Fi network, the Wi-Fi connection icon is displayed on
the status bar.
Add a Wi-Fi network
Some Wi-Fi networks do not broadcast SSIDs. Therefore, you need to add such Wi-Fi networks
when you are to use them.
1. Go to Settings > WIRELESS & NETWORKS and tap
2. Set Network SSID and Security.
3. Tap Save.
Delete Wi-Fi networks
The system automatically saves connected and added Wi-Fi networks and connects the tablet to one
of them when the tablet is used in the corresponding network coverage. Perform the following steps
to delete a Wi-Fi network:
User Manual
in the upper right corner.
8