Table of Contents
Advertisement
The following illustration shows a modem connected to the serial port of the
Remote Supervisor Adapter in the xSeries 450 on the left, a modem connected to
the serial port of the Remote Supervisor Adapter in the xSeries 450 on the right,
and a modem connected to the remote administrator system. Placing modems at
opposite ends of the ASM interconnect network bus ensures that if an ASM
interconnect connection in the bus fails, all of the servers on the ASM interconnect
network have access to a modem to forward system-management data to the
remote system-management administrator.
Modem
Note: A Remote
xSeries 450
Supervisor Adapter is
required in each server.
Note: The ASM Interconnect module is connected to the RS485 port on the
back panel of the Remote Supervisor Adapter in each server.
Remote system
management
administrator system
Modem
xSeries 450
Chapter 2. Configuring your server
Modem
xSeries 450
ASM
Interconnect
modules
29
Advertisement
Table of Contents
