Adjusting The Picture; Adjusting The Sound - Sony TRINITRON KV-21C5B Service Manual

Additional TV Features

Adjusting the Picture

Although the picture is adjusted at the factory, you can modify it to suit your own
requirement.
1
Press the button on the remote control to
display the three different modes on the TV
/
screen.
2
Press the button to highlight the personal mode
symbol as shown.
3
Press the MENU button to display the menu on
the TV screen.
MENU
4
Press the blue button on the control to select the
symbol on the TV screen then press the yellow
button.
PROGR
5
Press the blue button to select the item you wish
to change (see below).
RM-883
6
Press the red or yellow button to alter the selected
item.
7
Press the MENU button to remove the menu
display from the TV screen.
Symbol Item
• Contrast
• Colour
• Brightness
• Sharpness
• Hue control (only for NTSC video signals)
• Reset - resets to factory preset picture level
• Represents the mode selected in the "Using
Select Mode" section.
Additional TV Features

Adjusting the Sound

Although the sound is adjusted at the factory, you can modify it to suit your own
requirement.
SELEC T
OFF
SELEC T
OFF
IIIIIIIIIIIIIII - - - - - -
IIIIIIIIIIIIIII - - - - - -
IIIIIIIIIIIIIII - - - - - -
IIIIIIIIIIIIIII - - - - - -
IIIIIIIIIIIIIII - - - - - -
10
9
1
Press the button on the remote control to
/ display the three different modes on the TV
screen.
2
Press the button to highlight the personal mode
symbol as shown.
3
Press the MENU button to display the menu on
the TV screen.
MENU
4
Press the blue button to select the
TV screen then press the yellow button.
PROGR
5
Press the blue button to select the item you wish to
change (see below).
RM-883
6
Press the red or yellow button to alter the selected
item.
7
Press the MENU button to remove the menu
display from the TV screen.
Symbol Item
• Mono/Stereo
A:Channel 1 sound or Mono sound/
B:Channel 2 sound (to select your desired
language from a dual sound broadcast)
DSP • On/Off (digital sound processor)
• Treble
• Bass
• Balance
• Reset (resets to factory preset sound level)
• Represents the mode selected in the "Using
Select Mode" section of the manual.
SELEC T
OFF
symbol on the
SELEC T
OFF
MONO STEREO
DSP ON OFF
IIIIIIIIIIIIIIIIIIIIIII - - - - - -
IIIIIIIIIIIIIIIII - - - - - - - - -
IIIIIIIIIIIIIII- - IIIIIIIIIIIIIII