Table of Contents
Advertisement
Troubleshooting guide
No power or no sound
Disc is inside but no sound
Disc sound skips, tone quality is low
Sound skips due to vibration
Much noise in broadcasts
Preset station is reset
Error display messages
Car's engine switch is not on. Turn your car's key to ACC or ON.
Cable is not correctly connected. Check connection.
Fuse is burnt. Replace fuse. Check volume or mute on/off.
If above solutions cannot help, press the RESET button.
Disc is upside down. Place disc in the correct direction, and the label side up.
Disc is dirty or damaged. Clean disc or change another disc.
Disc is dirty or damaged.
Clean CD or change another CD.
Mounting angle is over 30º. Adjust mounting angle to less than 30º.
Instable mounting. Mount the unit securely with the mounting parts.
Station is too far, or signals are too weak.
Select other stations of higher signal level.
Battery cable is not correctly connected.
Connect the battery cable to the terminal that is always live.
NO FILE: Disc is not CD or contains no MP3 files.
ERR-7:
Disc upside down.
ERR-10: Recovery error, check the disc.
ERR-11: MP3 error, check the disc.
ERR-3: ERR-4: Disc mechanism error.
Press EJECT button to eject the disc. In case that the disc cannot be ejected by
pressing EJECT button, press the RESET switch and press the EJECT button
again. If still not ejecting consult your dealer.
22
Advertisement
Table of Contents
