Table of Contents
Advertisement
General functions
Turning on/off
Press any button to turn the unit on. Press and hold POWER button to turn it off.
Volume control
The volume level can be adjusted at any time by rotating VOLUME knob.
Bass, treble, balance, fader control
Press VOLUME knob to select bass, treble, balance or fader mode. The corresponding word appears on the display.
Rotate VOLUME knob to adjust the selected parameter. When DSP is on, treble and bass control is not available.
Balance is to adjust the balance between the left and right speakers. Fader is to adjust the balance between the rear
and front speakers.
Mute function
Press MUTE button to cancel the sound. Press it again or change the volume level to resume the sound.
BEEP ON/OFF mode
Press and hold SEL button for 2 seconds, the display will show DSP OFF. Press SEL button continuously until the
display show BEEP ON; rotate VOLUME knob to toggle between BEEP ON and BEEP OFF, then leave the unit
idle for your desired setting to take effect.
LOUD mode
Press LOUD button to emphasize the Bass output, the word LOUD ON shown on the display indicates that the
loudness function is on.
DSP mode
10
Advertisement
Table of Contents
