Table of Contents
Advertisement
/
/
YPbPr Ports
The "Y," "Pb" and "Pr" are sets of three inputs or outputs on better video equipment and TVs.
Blue port represents Pb port, Red represnts Pr port, and Green represent Y port. Connect the
YPbPr cable to these three ports.
COAXIAL (SPDIF Out)
The SPDIF coaxial output port is capable for providing digital audio to external speakers or
compressed AC3 data to an external Dolby Digital Decoder via a coaxial cable.
HDMI Port
The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface to
transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI
audio/video device to this port. The HDMI Technology can support a maximum resolution of
1920x1080p but the actual resolutions supported depend on the monitor being used.
NOTE:
After installing the HDMI device, make sure the default device for sound playback is the
HDMI device. (The item name may differ by operating system. Refer the figures below
for details.), and enter BIOS Setup, then set Onboard VGA output connect to D-SUB/
HDMI under Advanced BIOS Features.
Please note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM
formats. (AC3 and DTS require the use of an external decoder for decoding.)
In Windows XP, select Start>Control Panel>Sounds and Audio Devices>Audio, set the
Default device for sound playback to Realtek HDA HDMI Out.
Hardware Installation Process
1 7
Advertisement
Table of Contents
