Important Safety Information - Sonos PLAY:3 Product Manual

18
Indicator Lights
Rapidly flashing Playback / Next Track failed
orange
Flashing orange During SonosNet setup, this occurs
after a button press while the
product is searching for a household
to join.
Slowly flashing orange Fault mode
and white

Important Safety Information

Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products.
6.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
7.
Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
8.
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
9.
Unplug this apparatus during lightning storms or when unused for long periods of time.
10.
Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in
11.
any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The Mains plug should be readily available to disconnect the equipment.
12.
Player State Sonos Product
CONNECT, Indicates either playback or next track was not
CONNECT:AMP, PLAY:1, possible
PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
CONNECT, If the lights are flashing orange and white AND the
CONNECT:AMP, PLAY:1, volume automatically mutes, this indicates the
PLAY:3, PLAY:5, player is experiencing a fault condition.
PLAYBAR, SUB
Additional Information
•
Press the Pause button to stop the audio
•
Check the room temperature to make sure it's
less than 104°F/40° C
•
If the player is in direct sunlight, provide
shade
•
Allow the product to cool for several minutes
and then press Play to restart the audio
•
If the problem does not resolve, please
contact Customer Support
Product Guide