Player Status Indicators - Sonos PLAY:3 Product Manual

SONOS PLAY:3

Player Status Indicators

Important Note: Do not place any items on top of your Sonos player. This may impede the
air flow and cause it to overheat.
Indicator Lights
Solid white Powered up and associated with a
Sonos system
Flashing white Powering up
Flashing green Powered up, not yet associated with
a Sonos system
Solid green Volume set to zero or muted
Slowly flashing green Surround audio is off or
SUB audio is off
Solid orange During wireless setup, this occurs
while the Sonos open access point is
temporarily active.
If you are not setting up your Sonos
system, this may indicate warning
mode.
Player State
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
CONNECT,
CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
PLAY:1, PLAY:3, SUB
CONNECT, SUB,
CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
Sonos Product
If desired, when the product is in normal operation,
you can turn the white status indicator light on or off
by selecting White Status Light from the Room
Settings menu.
(The SUB indicator will reflect the same setting as
the player it is paired with.)
For a SUB, this may indicate the SUB is not yet paired
with a player.
Applicable for player configured as a PLAYBAR
surround speaker, or for a SUB paired with a PLAYBAR
If the orange light is on AND the player's volume
level automatically reduces, this indicates the player
is in warning mode.
•
•
•
•
•
•
Additional Information
Press the Pause button to stop the audio
Check the vent slot for adequate cooling
Check the room temperature to make sure it's
less than 104°F/ 40° C
If the player is in direct sunlight, provide
shade
Allow the player to cool for several minutes
and then press Play to restart the audio
If the problem does not resolve, please
contact Customer Support
17