Selecting the . . . option
Individual Drives
5. On the volume dialog:
a. If you want to change the name of a volume, type over the name in the Volume
Name box.
b. Read the warning about the loss of data when you change the device
configuration and select the I understand check box to signify that you accept
the risk and activate the Configure button.
Important:
If you want to save any of the data that is on the device drives,
back it up to another device before continuing with the configuration.
c. Click Configure to begin the configuration change.
6. After the configuration change completes, click OK to close the configuration
message display:
7. Go to
http://support.wd.com
about downloading and restoring the WD software and disk image.
Displays a volume dialog for specifying the . . .
Volume name for each drive:
and see Knowledge Base answer ID 7 for information
MANAGING AND CUSTOMIZING THE DEVICE – 63
MY BOOK DUO
USER MANUAL