TABLE OF CONTENTS Table of Contents Table of Contents Safety Warning General Information Package Contents & Features Front Panel Rear Panel Remote Control Unit (RCU) Programing the Remote Control Installing Equipment Channel List Guide Menu Guide Main Page I. CHANNEL MANAGER II.
SAFETY WARNING Warning Please read the following recommended instructions carefully to avoid the risk of your physical Injury before the product is operated. Safety Instructions and Precautions - Do not cover the receiver and keep clear space around the receiver for sufficient. - Check the receiver's operation voltage 90~250V, 50Hz~60Hz, Max 30W Keep liquid away from the receiver.
GENERAL INFORMATION Package Contents & Features User’s Package Contents Manual User’s Please ensure that the following items are included with the receiver in your packing. Manual User’s User’s Manual Manual User's Manual Remote Control A/V Cable Batteries 2EA Unit (for RCU) Features •...
GENERAL INFORMATION Front Panel 1. CH Up/Down Channel up / down or select the item of Menu. 2. VOL Left/Right Volume left/right or select the item of Menu. 3. POWER Button Switch between Power on and Standby modes. 4. USB Port To upgrade firmware.
GENERAL INFORMATION Rear Panel 1. SAT IN 9. S-VHS Connect to Satellite antenna cable. Connect to the S-VHS jack of TV. 2. LOOP OUT 10. TV / VCR Connect to another STB. Connect to TV or VCR. 3. DIGITAL AUDIO 11.
GENERAL INFORMATION Remote Control Unit (RCU) User's Manual...
Page 9
GENERAL INFORMATION Remote Control Unit (RCU) 21. PAL / NTSC 1. POWER Switch the receiver between operation and standby mode. Switch PAL or NTSC mode. 22. INFO 2. TV POWER Display the program information box on the screen and Turn on/off the TV. edit the name of favorite channel list.
GENERAL INFORMATION Programing the Remote Control User's Manual...
Page 11
GENERAL INFORMATION Programing the Remote Control Programing the RCU There are two ways to program the remote control ; Automatic Code Search or Direct Entry. I. Usnig Automatic Code Search 1) Turn on the component you want to control (TV, VCR or DVD). 2) Press and hold the component key you want to program.
INSTALLING EQUIPMENTS Connections This section explains several ways of connecting the receiver to your existing TV, VCR and Hi-Fi system. You can choose one of the following setups that we recommend. If you have any problem or need help, consult your dealer or service provider.
CHANNEL LIST GUIDE Channel List Guide CHANNEL LIST GUIDE 1. Normal Live Mode a) When you select one channel, information bar appears automatically on the screen for few seconds. This bar provides you the current channel information. b) Press INFO button to see the information during normal live mode.
Page 14
CHANNEL LIST GUIDE Channel List Guide 4.EPG (Electronic Program Guide) a) Press EPG button on the live mode. b) EPG of the current channel appears on the screen. c) Select the channel that you want to watch program. d) To reserve program with recording function, press REC button once.
MENU GUIDE I. Channel Manager MAIN PAGE Press the [MENU] key on the RCU to open Main Page on the screen. Main Page will be displayed. 1. You can move into the main page using ▲▼◀ ▶ on the RCU. 2.
Page 16
MENU GUIDE I. Channel Manager I-2. Rename 1. Using◀ ▶go to the Rename mode. 2. Select the channel that you want to rename using ▲▼ and then press OK. 3. Keypad Dialog displays on the screen. 4. Edit the name entering NUMBERS and / or WORDS in the Keypad Dialog.
MENU GUIDE II. Installation II. INSTALLATION This section may help you to set up antenna and scan satellite or transponder, etc. Select Installations in Main Page using and press OK. Press EXIT to return to the previous menu or press ▲▼...
Page 18
MENU GUIDE II. Installation II-2. DiSEqC Switch 1. Select Channel Search in Installation using ▲▼ and press OK. a) If you select DiSEqC Switch and press OK on the menu will be, DiSEqC Switch Page will be displayed. b) Select the proper Satellite of each DiSEqC port (A~D) using ◀...
Page 19
MENU GUIDE II. Installation II-3 Motor Setup f) Motor Control Select the position using ◀ ▶ and then press OK. Message box displays on the screen. - Store Sat position : Stores the current position of the motor for the selected satellite. - Goto Sat Position : Moves the motor to the stored posi- tion of the selected satellite.
Page 20
MENU GUIDE II. Installation II-4. Network This section may help you to set up network con- figurartion. 1. IP Setup Select one from three kinds of options for Network Setting. a) Not Use - In this case, network is disabled. b) Automatic - This is for user to use dynamic IP address service.
Page 21
MENU GUIDE II. Installation II-4. Network 2) Configuration in your STB a) Please go to IP Set up an click “Apply” (Installations Network IP Set up) b) Exit from IP set up and go to Home Stream Setup. User must insert Server-IP into the STB by using numeric buttons personally c) The IP address must be the same as showed in pref-...
MENU GUIDE III. Options III. OPTIONS This section may help you to set up OSD language, time , etc. Select Options in Main Page using press OK. ▲▼ Press EXIT to return to the previous menu or press MENU to go to the current live channel. III-1.
Page 23
MENU GUIDE III. Options III-2. Control Panel 1. Select TV Setup in Options using and press OK. a) Video Output ▲▼ - Press OK to display Video Output list. - Select RGB if your SCART supports RGB control and then press OK. - Select CVBS if your SCART does not support RGB control and the press OK.
MENU GUIDE IV.Utility IV. UTILITY This section may help you to use USB, etc. Select Utility in Main Page using and press OK. ▲▼ IV-1. System Information IV-2. USB IV-3. Factory Default IV-1. System Information This option help you to know the current S/W and H/W version.
TROUBLESHOOTING Troubleshooting Before contacting your local service center. please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local retrailer for further instructions. 1. Nothing appears on the Front Panel or No power supply - Check that the power cable is plugged into the power socket.
SPECIFICATIONS Specifications I. Tuner & Channel Specification Item Type 1 x F Type, IEC169-24, Female Frequency Rage 950MHz to 2150MHz RF Impedance 75 Ohm unbanlanced Signal Level -65 to -25 dBm LNB Power 13.5/18.5Vdc +/- 5%, 0.5Amax, Overload Protected 22KHz Tone Frequency : 22KHz +/- 2KHz, 0.6Vpp +/- 0.2V DiSEqC Control Version1.0, 1.1, 1.2, Tone burst A/B...
Page 27
SPECIFICATIONS Specifications IV. A/V & Date In/Out Specification Item CVBS, L, R Output(Yellow, White, Red Jack) with Volume Control RCA Output Component Video(YUV) Out S-VHS Output 4-pin MINI SPDIF Digital Bitstream Out (Coaxial, Optical) Data Interface RS-232, Bit Rate: 115,200baud Connector: 9-pin D-sub Male type - USB : Type A Connector(FRONT/REAR) - Ethernet : 10/100Mbps, DHCP Supporting...