Adjustable Height - InFocus SP-CEIL-012 Installation Manual

SP-CEIL-012

Adjustable Height

1. Screw the fully threaded nipple all the way into the secured top plate. Use the jam screw (supplied) to
secure the pipe (Figure 2).
2. Screw the PBC coupling all the way onto the threaded nipple or (optional) 1-1/2" pipe and secure the M6
x 12 Phillip screw (Figure 3).
CEILING STRUCTURE
JAM NUT
Figure 2. Height Adjustment
Make sure you don't remove the two (2) 8mm screws completely from the extension column
WARNING:
when adjusting the height. Failure to do so may result in personal injury and damage to the
projector. Simply loosen, adjust and tighten screws.
Installation Manual
TOP PLATE
1-1/2 NIPPLE
CEILING STRUCTURE
JAM NUT
(OPTIONAL LENGTH)
Figure 3. PBL Positioning
TOP PLATE
1-1/2 NIPPLE
Page - 7 -